Skip to content

Technical Specifications

Dimensions

  • Outside Diameter: 69mm
  • Typical Surface Area: 0.54 m² (Per 10”)

Sterilisation and Sanitisation*2

  • Steam or Autoclave: 121°C for 15 mins (40 cycles)
  • Hot Water: 90°C for 30 mins (0.2 bar ?p max)

*2 Applies to single open end cartridges only. For all steaming and hot water applications, the Reinforced Polypropylene End Cap option must be used.

Maximum Operating Conditions

  • Temperature: 80ºC
  • Recommended Maximum Differential Pressure:
    • Forward Flow: 4.0 Bar @ 20ºC
    • Reverse Flow: 3.5 Bar @ 20ºC
  • Recommended change-out differential pressure: 2.5 Bar

Materials of Construction

  • Filter Media: Halar (ECTFE)
  • Media Support: Polypropylene or Polyester
  • End Caps: Polypropylene
  • Cage/Core: Polypropylene

Product validation guide available on request. All SupaPore Halar cartridges are manufactured under strict control with batch number identification, giving full traceability on all components.

Features and Benefits

  • Broad chemical compatibility with a range of solvents and chemicals at an attractive cost
  • Available with either polypropylene or nylon hardware
  • High flow rates, low pressure drops, long life, and low extractables
  • Manufactured under strict control with batch number identification, giving full traceability on all components
  • Materials USP Class VI Plastics tested and meet US FDA Title 21 requirements
  • Full product validation guide available

Related Products

SupaPore TP

SupaPore TP Microfiltration cartridges have been designed specifically for use in a wide range of aggressive gas and liquid processing applications. Its naturally hydrophobic PTFE membrane makes this ...

Tetpor Plus

TETPOR PLUS filters are manufactured entirely from fluoropolymers, making them extremely resistant to a wide range of aggressive chemicals. These filters have been specifically designed for the filtra...

SupaPore FP H0P

SupaPore H0P hydrophobic filters are specifically designed for venting applications on tanks and vessels and for the filtration of compressed air and gases. These cartridges contain a very fine rated ...

SupaPore TTE

Dimensions Outside Diameter: 70mm Typical Surface Area: 0.63m² (Per 10”) Length: See ordering guide Maximum Operating Conditions Temperature: 150ºC Sterilisation and Sanitisation Steam or Aut...
Let’s talk

Our team is ready to discuss how we can find a performance solution for you.

Contact Us