Skip to content

Technical Specifications

Materials of Construction

  • Filtration Membrane: Polyethersulphone
  • Upstream Support: Polypropylene
  • Downstream Support: Polypropylene
  • Inner Support Core: Polypropylene
  • Outer Protection Cage: Polypropylene
  • End Caps: Polypropylene
  • End Cap Insert (if applicable): 316L Stainless Steel
  • Standard o-rings/gaskets: Silicone / EPDM
  • Capsule Body: Polypropylene
  • Capsule Vent Seals: Silicone

Food and Biological Safety

Materials conform to the relevant requirements of 21CFR Part 177, EC1935 / 2004 and current USP Plastics Class VI – 121 °C and ISO10993 equivalents.

Recommended Operating Conditions

Up to 70 °C (158 °F) continuous operating temperature and higher short-term temperatures during CIP to the following limits.

Whilst PROPOR ME can withstand reverse pressure, poor control of backwash procedures can result in damage to the product. Consult Parker domnick hunter before using reverse flow or pressurisation techniques.

Effective Filtration Area (EFA)

10¨ (250 mm) 0.6 m² (6.45 ft²)

Cleaning and Sterilisation

PROPOR ME cartridges can be repeatedly steam sterilised in situ or autoclaved at up to 130 °C (266 °F). They can be sanitised with hot water at up to 90 °C (194 °F) and are compatible with a wide range of chemicals.

For detailed operational procedures and advice on cleaning and sterilisation, please contact the Technical Support Group through your usual Parker domnick hunter contact.

Recommended Rinse Volume

Prior to use – 10 litres per 10¨ (250 mm) filter cartridge.

Features and Benefits

  • 0.45, 0.65 & 0.8 micron polyethersulphone membrane
  • Particulate removal and microbial reduction
  • Increased protection of final membrane stage
  • Inherently hydrophilic membrane
  • All materials of construction meet EC1935 / 2004 food contact regulations

Related Products

SupaPore VPBA

SupaPore VPBA cartridges feature a high flow, highly asymmetric PES (Polyethersulphone) membrane with a built-in pre-filter. The supporting pre-filter layer and membrane combination improves on-stream...

Prepor NG

Parker domnick hunter’s continued focus on process optimization and control has led to the development of a new range of prefilters for the clarification and pre-stabilization stages of wine process...

SupaPore THB

SupaPore THB Microfiltration cartridges have been designed specifically for air and gas applications where the highest flow rates and lowest pressure drops are critical (e.g., off-gas filtration in fe...

High Flow Tetpor II

HIGH FLOW TETPOR II gas sterilisation filters have been developed to benefit from technological advances within the manufacture of PTFE membranes. This new generation of filter sets the standard with ...
Let’s talk

Our team is ready to discuss how we can find a performance solution for you.

Contact Us