SupaPore TTE
Dimensions
Outside Diameter: 70mm
Typical Surface Area: 0.63m² (Per 10”)
Length: See ordering guide
Maximum Operating Conditions
Temperature: 150ºC
Sterilisation and Sanitisation
Steam or Aut...
Product Categories Filtration Products
Dimensions
- Outside Diameter: 70mm
- Typical Surface Area: 0.63m² (Per 10”)
- Length: See ordering guide
Maximum Operating Conditions
- Temperature: 150ºC
Sterilisation and Sanitisation
- Steam or Autoclave: 142ºC for 30 mins (up to 30 cycles)
- During Steam in place (SIP), the differential pressure across the cartridge should not exceed 0.30 bar at 142ºC
Recommended Maximum Differential Pressure:
- Forward Flow:
- 5.5 Bar @ 24ºC
- 3.8 Bar @ 75ºC
- 2.0 Bar @ 125ºC
- 1.0 Bar @ 150ºC
- Reverse Flow:
- 3.4 Bar @ 24ºC
- Recommended change-out differential pressure: 2.5 Bar
The operating conditions above should be treated as maximum differential pressures for short-term use without causing cartridge collapse problems.
Product validation guide available on request. All SupaPore TTE cartridges are manufactured under strict control with batch number identification, giving full traceability on all components.
Standard Materials of Construction
- Filter Media: Polytetrafluoroethylene (PTFE)
- Media support: PTFE
- End Caps: PFA
- Cage/Core: PFA
High Flow Tetpor II
HIGH FLOW TETPOR II gas sterilisation filters have been developed to benefit from technological advances within the manufacture of PTFE membranes. This new generation of filter sets the standard with ...
SupaPore VP
SupaPore VP Microfiltration cartridges use a pleated high surface area Polyethersulphone membrane that has been designed for use in a wide range of liquid processing applications. The naturally hydrop...
SupaCarb BE
SupaCarb BE filter cartridges feature an acid-washed, high-purity coconut-based carbon block combined with a double-layer, melt-blown fibre pre-filter layer to produce an economically superior high-ca...
Prepor NG
Parker domnick hunter’s continued focus on process optimization and control has led to the development of a new range of prefilters for the clarification and pre-stabilization stages of wine process...
SupaPore VPBA
SupaPore VPBA cartridges feature a high flow, highly asymmetric PES (Polyethersulphone) membrane with a built-in pre-filter. The supporting pre-filter layer and membrane combination improves on-stream...
Cartridge End Fittings
Our filters come with a range of end fittings to suit different housings and applications. End caps are available with a variety of seal materials, including EPDM, Buna-N, Silicone, Viton and FEP Sili...
Prepor PES
PREPOR PES is an innovative particulate grade membrane prefilter cartridge designed to work in harmony with final sterilizing filters, to guarantee the highest levels of performance and security. PREP...
SupaPore VPW
Within the beverage industry, it is important that products are microbiologically stabilised prior to packaging to prolong shelf life, and this is achieved without affecting the nature of the product....
SupaSep LGP
The removal of fine liquid aerosols from process gas streams is essential in protecting equipment and guaranteeing process performance. The new SupaSep LGP provides exceptional separation performance ...