SupaPore PC & FC
SupaPore pleated depth media capsules are fully disposable filter units for small and medium scale liquid and gas processing applications. They are ready-to-use, avoiding the need to purchase or maintain filter housings and are easy to change out with minimal downtime. The filtration unit is permanently enclosed inside the capsule shell to minimize post-use cleaning and operator exposure to process fluids. SupaPore capsules are available with pleated polypropylene or Borosilicate Glass microfibre media and offered with a range of inlet/outlet connections to suit most process systems. The filters are supplied in a wide range of lengths from 50mm to 750mm and two diameters of 75mm and 90mm.
SupaPore PC Capsules Polypropylene:
- 100% polypropylene construction
- Absolute removal ratings
- Wide chemical compatibility
SupaPore FC Capsules Glass Microfibre:
- Borosilicate Glass Microfibre media
- 100% polypropylene hardware
- Absolute removal ratings
- Wide chemical compatibility
Technical Specifications
Sterilisation and Sanitisation*
*Applies to non-gamma sterilised option only
- Steam or Autoclave: 125°C for 60 mins (10 cycles)
- Hot water: Up to 90°C
Maximum Operating Conditions
- Maximum Temperature: 43ºC @ 2.0 Bar
- Maximum Pressure:
- 5.5 Bar @ 20ºC (Liquid)
- 4.1 Bar @ 20ºC (Gas)
- Max Differential Pressure:
- 3.4 Bar @ 20ºC (Forward Flow)
- 2.7 Bar @ 20ºC (Reverse Flow)
- Recommended change-out differential pressure: 2.5 Bar
Standard Materials of Construction
- Filter media:
- Polypropylene (P)
- Borosilicate Glass Microfibre (F)
- Media Support: Polypropylene
Features and Benefits
- Fully disposable unit avoids the need to purchase a filter housing
- Ready to use for easy filter change-out and minimum downtime
- Enclosed filter unit minimises operator exposure and post-use cleaning
- Wide range of inlet and outlet connections available so suitable for most process systems
- All polymer construction
- Full product validation guide available
- Thermally bonded and adhesive-free construction
- Capsules are non-pyrogenic and can be autoclaved multiple times
- Materials meet US FDA CFR Title 21 requirements
- Available in a range of grades and pore sizes
- Manufactured in clean room facilities under ISO quality system
